Starline Brass 6.5 Creedmoor (500 pieces)

Starline Brass 6.5 Creedmoor For Sale

Starline Brass 6.5 Creedmoor is proud to produce the highest quality brass snare drum available. Their brass is made up of 70% copper and 30% zinc and is stretched vertically during the manufacturing process, resulting in a more uniform wall thickness. Cases are annealed between each extraction to ensure consistent metallurgy across all batches. Each brass case is manually inspected to ensure the highest quality possible.

Hornady Custom 6.5 Grendel 123 gr and 6.5 Creedmoor Starline Brass is located in Sedalia, MO, and has been in the company for over 30 years. Trust primer for 6.5 Creedmoor for your next recharges; You will not be disappointed. New brass without a primer is not loaded ammunition. Bulk brass must be sized along its entire length, trimmed and beveled before loading.

Brass Preparation: 

With bulk rifle brass (Starline Creedmoor brass, primers for 6.5 Creedmoor, Starline 6.5 Creedmoor brass review), you may sometimes notice that, in some cases, muzzles are “out of shape” or slightly dented below the shoulder. These imperfections occur in the final washing operation after the case mouth has been annealed. 

Starline 6.5 Creedmoor Brass and 6.5 Creedmoor primer manufacturers are aware of the cosmetic case and have worked to mitigate it, but due to the design of the equipment, dents can still occur. Minor dents are usually removed on the first firing and will not affect the life or performance of the case. On unplated brass, you may also notice that not all annealing stains may be removed, which can give the case neck a pinkish color. For some smaller caliber cases, the case mouths have a bit of a bell.

With new rifle brass, you must first straighten the shell and shell mouth, then chamfer and deburr the shell mouth inside and out. To straighten the case mouth, pass the case partially into the measuring die and let the expander ball straighten the brass. To prevent the case neck from extending, be sure to lubricate it inside the case mouth.

If using nickel-plated brass, special care must be taken to lubricate the cases before sizing. Nickel plates are harder than brass, and the cases require more effort to size. In case a case gets stuck, purchase a stuck case remover. Do not use pliers, screwdrivers, or other common household tools that may damage the die.

Specifications